eng
University of Tehran
Advances in Industrial Engineering
2783-1744
2016-09-22
50
2
165
176
10.22059/jieng.2016.60722
60722
مقاله پژوهشی
Robust Estimation in Nonlinear Modeling of Volatility Transmission in Stock Market
Seyed Babak Ebrahimi
b_ebrahimi@kntu.ac.ir
1
Department of Industrial Engineering, K.N.Toosi University of Technology, Tehran, Iran
Volatility transmission means the connection between different markets in a way that volatility can be transmitted from one market to another. The volatility of oil price in global markets is one of the factors which influence the capital markets of the countries of which their economy is based on oil revenues. Most of these markets have long-run memory characteristic which should be considered in modeling and estimation. In this paper the long memory effect in BEKK model which is one of the main Multivariate models of volatility spillover is considered and the Boudt & Croux (2010) approache is used for stable estimation of the model. The data used in this paper are daily returns of stock prices and oil prices in time interval December 2006 to January 2012. The paper investigate the influence of world oil price index on Dubai and Tehran stock markets in the strategic region of Middle East and also the mutual transmission between the two main trading partner of Iran and Emirates. The results indicate the volatility transmission from world oil market to Dubai and Tehran markets and also the transmission from Dubai market to Tehran market.
https://aie.ut.ac.ir/article_60722_b90b1b6d4c041754d0dfd03eba9144b0.pdf
Long memory
pricing
Return
Robust estimation
Volatility transmission
eng
University of Tehran
Advances in Industrial Engineering
2783-1744
2016-09-22
50
2
177
189
10.22059/jieng.2016.60723
60723
مقاله پژوهشی
Truck Sequencing and Dock Assignment in a Cross-docking System
Jamal Arkat
j.arkat@uok.ac.ir
1
Parak Qods
parak.qods@gmail.com
2
Fardin Ahmadizar
f.ahmadizar@uok.ac.ir
3
Department of Industrial Engineering, University of Kurdistan, Iran
Department of Industrial Engineering, University of Kurdistan, Iran
Department of Industrial Engineering, University of Kurdistan, Iran
In a supply chain, cross-docking is one of the most innovative systems for ameliorating the operational performance at distribution centers. Cross-docking is a logistics strategy in which freight is unloaded from inbound trucks and (almost) directly loaded into outbound trucks, with little or no storage in between, thus no inventory remains at the distribution center. In this paper, we consider the scheduling problem of inbound and outbound trucks with multiple dock doors, which the aim is to minimize the makespan. In this research, a mathematical model is derived to find the optimal solution. Also a Simulated Annealing algorithm is adapted to find near optimal solution, as the mathematical model will not be applicable for large scale problems. Numerical examples are presented in order to specify the efficiency of the proposed algorithm in comparison with mathematical model.
https://aie.ut.ac.ir/article_60723_f9da93f08d6bffa5c41d8dd4941fb70b.pdf
Cross-docking
Door assignment
Simulated annealing algorithm
Truck scheduling
eng
University of Tehran
Advances in Industrial Engineering
2783-1744
2016-09-22
50
2
191
203
10.22059/jieng.2016.60724
60724
مقاله پژوهشی
Production and Transportation Scheduling and Allocation of Orders in the Supply Chain
Mohammad Ali Beheshtinia
beheshtinia@semnan.ac.ir
1
Amir Ghasemi
ghasemii.amir@gmail.com
2
Moein Farokhnia
moein.farokhnia@gmail.com
3
Faculty of Engineering, University of Semnan, Iran
Faculty of Engineering, University of Semnan, Iran
Faculty of Engineering, University of Semnan, Iran
In this paper a scheduling problem in a 2-stage supply chain is discussed. Suppliers are in the first stage and in the second stage, there are vehicles which carry orders to a manufacturing center. The purpose is to allocate orders to suppliers, sequence the suppliers’ production, allocate orders to transport vehicles and prioritize orders that should be carried by vehicles to minimize the total time of the process and transportation. This issue has not yet been discussed in the literature. First, a mixed integer programming mathematical model is presented. Then, in order to solve the problem, a new algorithm is proposed which is a new combination of genetic and Simulated Annealing Algorithms. To evaluate the performance of the algorithm, it is compared with one of the algorithms presented in the literature, genetic algorithm and simulated annealing algorithm, separately. Comparison results indicate the advantage of the proposed algorithm in comparison with other algorithms.
https://aie.ut.ac.ir/article_60724_11379d783dddb7946a8fd820932ea8d3.pdf
Genetic Algorithm
Scheduling
Simulated annealing algorithm
Supply Chain
Transport Planning
eng
University of Tehran
Advances in Industrial Engineering
2783-1744
2016-09-22
50
2
205
220
10.22059/jieng.2016.60725
60725
مقاله پژوهشی
Robust Model for Designing a Dynamic Closed-loop Supply Chain with Adjustable Capacity
Siamak Jebreilzade
siamak.jebreilzade@yahoo.com
1
Behnam Vahdani
b.vahdani@gmail.com
2
Seyed Meysam Mousavi
mousavi.sme@gmail.com
3
Faculty of Industrial and Mechanical Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran
Faculty of Industrial and Mechanical Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran
Department of Industrial Engineering, Faculty of Engineering, Shahed University, Tehran, Iran
In this paper, firstly by using a mixed linear programming a new model of locating facilities with limited capacity is presented to design a closed-loop supply chain in a multi-product and multi-period mode. Then, using a robust optimization approach, the proposed model decreases in non-deterministic expansion. The results show that the proposed model can handle facility capacity in a closed loop logistics network. In addition, the results showed that the cost and time of test problems for the robust model is higher than the deterministic model.
https://aie.ut.ac.ir/article_60725_e927e1714efe1fbe00df98eab2990df4.pdf
Capacity planning
Closed-Loop network
Robust optimization
Supply chain design
uncertainty
eng
University of Tehran
Advances in Industrial Engineering
2783-1744
2016-09-22
50
2
221
233
10.22059/jieng.2016.60726
60726
مقاله پژوهشی
A Bi-objective Mathematical Model Toward Staff Planning Considering Cross-training
Hamed Habibnejad
h_habibnejad@ut.ac.ir
1
masoud Rabbani
mrabani@ut.ac.ir
2
Babak Javadi
babakjavadi@ut.ac.ir
3
Nastaran Ghorbani-Kutenaie
n.ghorbani@student.alzahra.ac.ir
4
School of Industrial Engineering, College of Engineering, University of Tehran, Tehran, Iran
School of Industrial Engineering, College of Engineering, University of Tehran, Tehran, Iran
Department of Industrial Engineering, College of Farabi, University of Tehran, Qom, Iran
Department of Industrial Engineering, School of Engineering, Alzahra University, Tehran, Iran
In this paper, the staff assignment problem considering cross-training of caregivers in health care systems is addressed to determine which staff should be cross-trained for each service and how they should be assigned to services. A bi-objective non-linear mathematical programming model is presented where the first objective function aims to minimize workload balancing, cross-training as well as maintenance and transportation costs, while the second objective function is concerned with maximization of caregivers’ satisfaction level. Several constraints with respect to budget capacity, staff absenteeism, maximum allowable consecutive shifts, multi-functionality and redundancy level and maximum allowable distance for transportation are taken into account to build a service plan. The behavior of the various elements and features of the model is evaluated in a real-world HC provider and the results reveal that the caregivers’ workload is relatively balanced and the caregivers’ preferences are satisfied.
https://aie.ut.ac.ir/article_60726_c5852cbe63bea0d0c2da4c6044ed1ba5.pdf
Cross-training
Health care systems
Optimization
Staff assignment
eng
University of Tehran
Advances in Industrial Engineering
2783-1744
2016-09-22
50
2
235
246
10.22059/jieng.2016.60727
60727
مقاله پژوهشی
Economic Order Quantity for Deteriorating Items with Imperfect Quality, Destructive Testing Acceptance Sampling, and Inspection Errors
Javad Hasanpour Rodbaraki
javad10049@yahoo.com
1
Ebrahim Sharifi
esharifi1372@gmail.com
2
Industrial Engineering, Quchan university of Advanced Technology, Quchan, Iran
Industrial Engineering, Quchan university of Advanced Technology, Quchan, Iran
Now a days, management and control of perishable inventories is important in many units and industrial enterprises. Basically perishable inventory management and control is more complex and challenging than inventories with unlimited lifetime. Hence determining the optimal inventory policies for these products is very important. In this paper, the optimal inventory policy for perishable items given to the a single acceptance sampling plan with destructive testing and inspection errors is adopted .After developing a model for the problem and obtaining the objective function, first an exact solution and a simple and efficient algorithm to find the optimal values is proposed. Then, the model will be validated with a numerical example and senility analysis.
https://aie.ut.ac.ir/article_60727_d795e9a313994506d1007af8c81bf41b.pdf
Acceptance sampling
Destructive testing
EOQ
Inspection
Perishable items
eng
University of Tehran
Advances in Industrial Engineering
2783-1744
2016-09-22
50
2
247
259
10.22059/jieng.2016.60728
60728
مقاله پژوهشی
Providing a New Mathematical Model for School Service Routing with Considering Gender Separation
Alireza Rashidi Komijan
rashidi@azad.ac.ir
1
Peyman Ghasemi
peiman.ghasemi@aut.ac.ir
2
Department of Industrial Engineering, Firoozkooh Branch, Islamic Azad University, Firoozkooh, Iran
Department of Industrial Engineering, Faculty of Industrial Engineering, South Tehran Branch, Islamic Azad University, Tehran, Iran
In our country, school bus routes are determined by experiments of driver without considering the scientific optimum route and location. Traversing additional routes will always result an increase in vehicle movements and fuel consumption and enormous costs. Hence, this paper will study the school bus routing in Tehran considering special students and a model will be presented to minimize traveling distance and to prevent repetitive crossings through the bus stops and to determine the shortest routes by presenting a way to propel several students to a bus stop. The proposed model will solve via GAMS software. Because the model is NP-Hard, the Genetic algorithm is used to solve the large scale problem. The contribution of this paper is to consider gender separation in schools and buses. To solve this problem, an integer linear programming model is developed. The conclusion indicates a decrease in transportation time.
https://aie.ut.ac.ir/article_60728_5265038df07073e4a97017b276f73d79.pdf
Gender separation
Integer linear programming
School bus routing problem
Special students
eng
University of Tehran
Advances in Industrial Engineering
2783-1744
2016-09-22
50
2
261
278
10.22059/jieng.2016.60729
60729
مقاله پژوهشی
A Multiple Objective Programming Model for Designing of Supply Chain Network with Efficient Manufacturers and Distributers
Hashem Omrani
omrani57@alumni.iust.ac.ir
1
Farzaneh Adabi
fanar_adabi@yahoo.com
2
Faculty of Industrial Engineering, Urmia University of Technology, Urmia, Iran
Faculty of Industrial Engineering, Urmia University of Technology, Urmia, Iran
One of the most important decisions in supply chain network (SCN) design is choosing the optimal location for the facilities. The facilities in SCN have different efficiency according to their locations. In this paper, efficiency of facilities is added to the supply chain network design by using data envelopment analysis model, and a multi-objective model is presented for the design of efficient supply chain network. The proposed model chooses the most appropriate place for manufacturers and distributors thereby decreases the total cost of the supply chain and simultaneously increases the efficiency. The desired supply chain has several raw materials and products, with four layers of suppliers, manufacturers, distributors and customers. The proposed model is locating manufacturers and distributors, and planning the purchase of any suppliers. The results of numerical example show that adding efficiency promotes the supply chain network model. Namely, with regard to the tradeoff between cost and efficiency objectives, SCN design with efficient facilities is better than networks based only on cost objective function.
https://aie.ut.ac.ir/article_60729_570250aa3169026140b84ea374a1145d.pdf
Efficiency
Data Envelopment Analysis
Multiple objective programming
Supply chain network design
eng
University of Tehran
Advances in Industrial Engineering
2783-1744
2016-09-22
50
2
279
293
10.22059/jieng.2016.60730
60730
مقاله پژوهشی
Stochastic Cell Formation Problem within Queuing Theory and Considering Reliability
Parviz Fattahi
pfattahi@gmail.com
1
Amir Saman Kheirkhah
kheirkhah@basu.ac.ir
2
Bahman Esmailnezhad
bahman.ismailnezhad@yahoo.com
3
Department of Industrial Engineering, Alzahra University, Tehran, Iran
Department of Industrial Engineering, Bu-Ali Sina University, Hamedan, Iran
Department of Industrial Engineering, Bu-Ali Sina University, Hamedan, Iran
In this study, the stochastic cell formation problem with developing model within queuing theory with stochastic demand, processing time and reliability has been presented. Machine as server and part as customer are assumed where servers should service to customers. Since, the cell formation problem is NP-Hard, therefore, deterministic methods need a long time to solve this model. In this study, genetic algorithm and modified particle swarm optimization algorithm are presented to solve problems. Because the metaheurstic algorithms quality depends strongly on selected operators and parameters, design of experiment is done for set parameters. The deterministic method of branch and bound algorithm is used to evaluate the results of modified particle swarm optimization algorithm and the genetic algorithm.Evaluates indicate better performance of the proposed algorithms in quality the metaheurstic algorithms final solution and solving time in comparing with the method of Lingo software’s branch and bound. Ultimately, the results of numerical examples indicate that considering reliability has significant effect on block structures of machine-part matrixes.
https://aie.ut.ac.ir/article_60730_88b27cf96284d59b88d9c2e2abf42bd2.pdf
Cell formation problem
Queuing theory
reliability
Metaheurstic algorithm
eng
University of Tehran
Advances in Industrial Engineering
2783-1744
2016-09-22
50
2
295
310
10.22059/jieng.2016.60731
60731
مقاله پژوهشی
Simoltaneous Lot-sizing and Scheduling in Hybrid Flow Shop Production Environment with Resource Constraint
Sahar Fallah Sanami
fallah.sahar@gmail.com
1
Reza Ramezanian
ramezanian@kntu.ac.ir
2
Mohsen Shafiei Nikabadi
mohsenshnaj@yahoo.com
3
Department of Economic and Management, Semnan University, Semnan, Iran
Department of Industrial Engineering, K.N. Toosi University of Technology, Tehran, Iran
Department of Economic and Management, Semnan University, Semnan, Iran
The aim of this Paper is to study a multi-product, multi-period production systems in a hybrid flow shop so that lot-sizing and scheduling will be detemined simultaneously. A new mixed-integer programming model is proposed to formulate the studied problem. The objective function in this investigation includes the total cost of production, inventory and external supply. In the case of not satisfying the demand of customers, this demand should be met by foreign suppliers with higher price. The simultaneous lot-sizing and scheduling problem are classified in strongly NP-hard class. Due to the high computational complexity of the studied problem, particle swarm optimization (PSO) and imperialist competitive algorithms (ICA) are implemented for solving the considered problem. The algorithms explore the solution space for both lot-sizing and scheduling and find a combination of production plan and sequence that is feasible and close to optimum. First, the implemented algorithms are used for solving randomly generated instances with different sizes. Then, these methods are used to solve the case of tile industry and the obtained results by two methods are compared with each other. Computational experiences show that the algorithms are able to achieve good-quality solutions for the problem in a reasonable time. Also, the results of ICA are better than PSO results for the mentioned case study.
https://aie.ut.ac.ir/article_60731_27bc5cda97841378ac5689d8e2c327cb.pdf
Hybrid flow shop production system
Imperialist competitive algorithm
Machine capacity constraint
mathematical modeling
Particle swarm optimization
Simultaneous lot-sizing and scheduling
eng
University of Tehran
Advances in Industrial Engineering
2783-1744
2016-09-22
50
2
311
325
10.22059/jieng.2016.60732
60732
مقاله پژوهشی
A Hierarchical Multimodal Hub Location Model with Maximum Allowable Delay (Case Study: Iran)
Firoozeh Kaveh
f.kaveh@ut.ac.ir
1
Jafar Razmi
jrazmi@hotmail.com
2
University of Tehran, Iran
University of Tehran, Iran
In this study, a hierarchical hub location problem by considering different modes of transportation and maximum allowed delay is investigated. This study is done on Iran’s express postal service with 2 days maximum delay in delivery considering ground and airport hubs. The problem is of the type of location and single allocation for collection, transfer and distribution of the shipments. All the hubs are of limited capacity and there is a penalty for violation of the maximum allowed delay. The strategic goal of the model is to determine the location of ground and airport hubs and the allocation of links to these hubs by which the delay is minimized and the total cost of the system is optimized. The model is linear mixed-integer programming. Finally, a case study to implement the model in Iran’s postal service is conducted, and a sensitivity analysis is done using GAMS software.
https://aie.ut.ac.ir/article_60732_22d3590a189ba164da31b71bfd4e2250.pdf
Capacitated hubs
Hierarchical hub location problem
Hub location problem
Single allocation
eng
University of Tehran
Advances in Industrial Engineering
2783-1744
2016-09-22
50
2
327
340
10.22059/jieng.2016.60733
60733
مقاله پژوهشی
Sustainable Construction Project Portfolio Selection under Interval- Valued Type-2 Fuzzy Sets
Vahid Mohagheghi
v.mohagheghi@gmail.com
1
Seyed Meysam Mousavi
mousavi.sme@gmail.com
2
Behnam Vahdani
b.vahdani@gmail.com
3
Department of Industrial Engineering, Faculty of Engineering, Shahed University, Tehran, Iran
Department of Industrial Engineering, Faculty of Engineering, Shahed University, Tehran, Iran
Faculty of Industrial and Mechanical Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran
Choosing the right set of projects is the first step of project oriented firms in strategic project portfolio management. Since economic growth depends on environmental and social issues, sustainable development has been an essential part of firms' plans to keep their competitive advantage. Moreover, market conditions, fast worldwide changes and other similar issues have given these issue ever-growing uncertain elements. As a result, this paper provides a method of sustainable construction-project portfolio selection under interval-valued type-2 fuzzy sets. This method consists of two main parts. The first level evaluates the proposed projects and omits the unsuitable ones. Then, in the second level, the portfolio is selected by means of mathematical programming. Eventually, to display applicability of the method, an application example is presented and solved.
https://aie.ut.ac.ir/article_60733_296e69c6bb13dc2b8ea019a5bd878185.pdf
Construction projects
Mathematical Programming
Project Portfolio Selection
Sustainable Development
Type-2 fuzzy sets
eng
University of Tehran
Advances in Industrial Engineering
2783-1744
2016-09-22
50
2
341
354
10.22059/jieng.2016.60734
60734
مقاله پژوهشی
Solving a Fuzzy Multi-objective Aggregate Production Planning Model with Learning and Deterioration Effects by Using Genetic and Tabu Search Algorithms
Esmaeil Mehdizadeh
emqiau@yahoo.com
1
Rasa Ghazizadeh
rasa_gh_87@yahoo.com
2
Faculty of Industrial and Mechanical Engineering, Qazvin Branch, Islamic Azad University, Iran
Faculty of Industrial and Mechanical Engineering, Qazvin Branch, Islamic Azad University, Iran
In this paper a non linear integrated fuzzy multi-objective production planning model with the labor learning and machines deterioration effects is presented. The objective function consists of two quantitative objectives namely increase profits and reduces the cost of system failure and a qualitative objective namely increases the satisfaction rate of the customers. Different weights for objectives and modification of the objectives by using fuzzy goal programming method are considered to convert the fuzzy multi-objective model to a deterministic single-objective model and the obtained model is solved by Genetic algorithm and Tabu search algorithm. Finally, the solution obtained from two algorithms compared together by using hypothesis test of equality of means. Experimental results show the proposed Genetic algorithm for solving the model has higher performance than the Tabu search algorithm.
https://aie.ut.ac.ir/article_60734_08fef3e3514607ea944baf6ac5f0316a.pdf
Aggregate production planning
Fuzzy goal programming
Genetic Algorithm
Multi-Objective Programming
Tabu search algorithm